User Online

User Online: 9
Today Visits: 7
Total Visits: 26036
Total Visitors: 24865
Your IP: 38.107.179.228

Ninja GS Series SHP Regulator

Share |

Send to a friend
Print
View full size

The SHP Regulator is a High-Pressure, 950 - 1100 psi output regulator that works well with the Tippman and AGD marker's that use a reactive/response style trigger system. The SHP is a very consistent regulator using the Ninja custom-made Belleville Spring Stack.

More details

Currently 3.25/5
1
2
3
4
5

Product Rating: 3.3/5 (8 votes cast)

More info
Data sheet
Comments (0)
Facebook
Product Video

The SHP Regulator is a Super High Pressure regulator that we have designed specifically for Tippmann markers running a Response Trigger and for Automag owners using a Reactive Trigger. There have been many instances, especially with the Tippmann's running RT and/or Cyclone Feed, where we have seen problems with the marker not working properly and it was due to the tank regulator not outputting enough pressure to run all of the air-assisted upgrades on the marker. Our answer to this problem is the SHP Regulator.

The regulator has two different output pressures depending on which marker you are shooting. For the Tippmann markers running a Response Trigger, you can remove 1 shim to reduce the pressure to 950psi. Ninja Paintball does not recommend using the 1100psi setting on your Tippmann marker.

If you are shooting an Automag and you want to increase the sensitivity on your Reactive Trigger, leave the pressure set to 1100psi. If you don't want as sensitive of a trigger, you can adjust it down to 950psi.

Markers:

Tippmann markers with Response Trigger installed

Automag markers with Reactive Trigger installed

Regulator Features:

Screws in any standard 4500psi Tank
MADE IN THE USA!!!!
Gen II SRT piston –Sonic Recharge Technology piston – plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
950 to 1100 PSI adjustable output pressure- great for Response and Reactive trigger systems
MFV – Mini Fill Valve – Non wrist digging, low profile design fill valve
All black tactical look
Meets all DOT, CGA and ASTM specifications
4500psi
Regulator Completely rebuildable by the end user
Every regulator is hand crafted and factory tested
Super low response curve 0-50 psi from full to empty
ASTM COMPLIANT bonnet thread
ASTM COMPLIANT DOT burst disc
ASTM COMPLIANT Low pressure burst disk
ASTM COMPLIANT Restrictor, bleed hole and safety groove
Mini Fill Valve IS hardened, plated 5000 psi rated
Reg installed to ASTM specifications